Fila Deterdek Pro - Cleaner
£12.99 each
Fila Deterdek Pro is a professional acid cleaner ideal for the end-of-installation wash. The acid wash will leave the surface in a perfectly clean condition which is essential for the next step of sealing the tiles. Recommended specifically for the Winckelmans' range, this will remove cement residue and stubborn inorganic dirt, created during the installation process.
Also effective against saline efflorescence, rust depostits & limescale.
Download the Deterdek Pro Tech Sheet
Product Details
- For exterior and interior use
- Coverage: 40-80m² per litre
- Available in 1L
- pH: 1.5*
- Contains Biodegradable ingredients
- Mortar Stain Remover: Removes Cement Residues after installation and the dirt left at the end of construction
- Multi-purpose: change dilution to vary its function of use
- Strong descaler: It can be used as a professional limescale and detergent remover
- ulti-surface: It can be used on Acid Resistant surfaces such as cotto, quarry tiles, procelain stoneware, glazed ceramic tiles
Suitability
- Porcelain tiles
- Glazed Ceramic tiles
- Acid-resistant stone surfaces
- Terracotta & Quarry tiles
Application
ALWAYS FOLLOW INSTRUCTIONS SHOWN ON THE LABEL. QR CODE ON BOTTLE CAN BE SCANNED FOR MORE INFORMATION.
Dilution: between 1:5 and 1:10 according to the level of dirt to be removed.
For post-installation cleaning and end-of-work cleaning: Wet the surface with water before washing. Then use Deterdek Pro diluted 1:5 or 1:10 (1 litre of product in 5 or 10 litres of water). Apply the solution over a few square metres at a time; wait a few minutes and then rub vigorously with a single-disc machine or abrasive pad. Remove any residue using microfibre cloths or a wet vacuum cleaner and rinse with plenty of water.
Should any stubborn dirt residue remain, repeat the wash with a more concentrated solution. For routine maintenance of outdoor surfaces with evident signs of ageing (smog, dust, etc.): Dilute 1 litre of product in 10 litres of water. Then follow the same application procedures described above. To remove fresh limescale deposits, rust and engobe, use the product undiluted.
Do not use on polished marble and acid sensitive materials. Test the product on a small, inconspicuous area of the surface or loose sample to ensure the material’s resistance to the product prior to full application.
Delivery Details
We provide a nationwide delivery service. All orders are subject to product availability. We aim to process all orders within five working days.
Depending on your delivery postcode and which products you order; delivery charges may vary. For further information on our charges please click here.
